 |
 |
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
| ||||||||||||||||
|
|
|
|
|
 |
 |
|
|
|
Increasing productivity and accuracy while reducing machining time on Power Generation component parts. | |
|
Machining: Five machines... or a single multi-tasking machine? |
||
|
Total cycle time is reduced from three weeks to 44 hours. This mill/turn MASTERCENTER™ uses rotary tables for vertical turning and milling of turbine housings. |
|
| 30 years experience building rotor slotters... | |
|
|
The Ingersoll Generator Rotor Slotter is a highly productive machining system designed specifically for this task. The machine includes a main slotting head and an independent auxiliary head with a horizontal spindle. The slotting head is used to machine the coil slots in the rotor and the auxiliary head is used to machine various other rotor features. |
| Machining five sides in one setup... | |
| Horizontal spindle units permit the machining of a work-piece on five sides in one single setup. NC circular interpolation is used for the rough-milling and finish-milling of grooves and faces in turbine and compressor casings. |
|
| Multiple technology in practice... | |
|
Do All This..
Machining task: A complex turbine component made of titanium needs to be machined accurately while maintaining a close tolerance finish.
1. Milling of flange surface using vertical spindle unit 2. Drilling of the flange holes using the vertical spindle unit 3. Grinding of the sealing surface 4. Drilling holes using the universal spindle unit 5. Back spot-facing using the universal spindle unit 6. Milling of a vertical slot into the outer diameter 7. Milling of a radial groove 8. Turning of a conical inner face ... with This!
MultiTec™ 3000 FT |
For Power Generation component machining: Contact us
|
|
|
|
|
Copyright
© 2002
All rights reserved.
|
|||||
